| PART |
Description |
Maker |
| MAX1703 MAX1703ESE |
1-Cell to 3-Cell / High-Power 1.5A / Low-Noise / Step-Up DC-DC Converter
1-Cell to 3-Cell, High-Power 1.5A, Low-Noise, Step-Up DC-DC Converter
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
|
| STCF01PMR STCF01 |
Step-up Converter for Cell Phone Camera Flash LEDs
|
STMICROELECTRONICS[STMicroelectronics]
|
| AS1323 |
1.6μA Quiescent Current, Single Cell, DC-DC Step-up Converter
|
ams AG
|
| STCF01PMR STCF01 STCF0106 |
Step-up converter for cell phone camera flash LEDs
|
STMicroelectronics
|
| LT1610 LT1610CMS8 LT1610CS8 LT1610IS8 LT1610IS8PBF |
1.7MHz, Single Cell Micropower DC/DC Converter
Constant-Current/ Constant-Voltage 1.4MHz Step-Up DC/DC Converter
1.7MHz, Single Cell Micropower DC/DC Converter; Package: SO; No of Pins: 8; Temperature Range: -40°C to 85°C 0.9 A SWITCHING REGULATOR, 2000 kHz SWITCHING FREQ-MAX, PDSO8
1.7MHz, Single Cell Micropower DC/DC Converter; Package: MSOP; No of Pins: 8; Temperature Range: 0°C to 70°C
|
LINER[Linear Technology]
Linear Technology, Corp.
LINEAR TECHNOLOGY CORP
|
| MAX1705C/D MAX1706C/D MAX1705D MAX1705EEE MAX1706D |
1- to 3-Cell / High-Current / Low-Noise / Step-Up DC-DC Converters with Linear Regulator
PTSE 18C 18#20 SKT PLUG
1- to 3-Cell, High-Current, Low-Noise, Step-Up DC-DC Converters with Linear Regulator
|
Maxim Integrated Products, Inc.
|
| ZXSC400 ZXSC400E6TA |
LED DRIVER BOOST CONVERTER
Multi Cell DC-DC Converter Controller
|
Diodes Incorporated
Zetex Semiconductors
|
| MB3883PV MB3883PFV MB3883 |
6-ch DC/DC Converter IC with Synchronous Rectifier for Voltage Step-up and Step-down
6-ch DC/DC Converter IC With Synchronous Rectification for voltage step-up and step-down
|
Fujitsu Microelectronics
FUJITSU[Fujitsu Media Devices Limited]
|
| LTC1779 1779F LTC1779ES6 LTC1779ES6TRPBF |
250mA Current Mode Step-Down DC/DC Converter in ThinSOT
From old datasheet system
250mA Current Mode Step-Down Converter in SOT-23
250mA Current Mode Step-Down DC/DC Converter in SOT-23; Package: SOT; No of Pins: 6; Temperature Range: -40°C to 125°C 0.5 A SWITCHING REGULATOR, 650 kHz SWITCHING FREQ-MAX, PDSO6
|
LINER[Linear Technology]
Linear Technology, Corp.
|
| HDD60-48T512X HDD50-12D05P HDD50-12D05T HDD50-12D0 |
75W 960MHZ 26V NI780L 的DC - DC转换器的5060
3000 GATE LOGIC CELL ARRAY - NOT RECOMMENDED for NEW DESIGN DC - DC转换器的5060
1000000 SYSTEM GATE 1.2 VOLT FPGA DC - DC转换器的5060
DC-DC CONVERTER 50~60W DC - DC转换器的5060
XC2VP7-6FFG672C DC - DC转换器的5060
2000 GATE LOGIC CELL ARRAY - NOT RECOMMENDED for NEW DESIGN 的DC - DC转换器的5060
DC-DC CONVERTER 50~60W 的DC - DC转换器的5060
6000 GATE LOGIC CELL ARRAY - NOT RECOMMENDED for NEW DESIGN
4500 GATE LOGIC CELL ARRAY - NOT RECOMMENDED for NEW DESIGN
; Collector Emitter Voltage, Vceo:30V; Transistor Polarity:NPN; Power Dissipation:3.5W; C-E Breakdown Voltage:30V; DC Current Gain Min (hfe):300; Collector Current:400mA; Package/Case:TO-39
|
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
|
| RN5RY201A RN5RY201A-TL RN5RY201A-TR RN5RY201C RN5R |
VFM step-up DC/DC converter controller. Output voltage 3.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.0V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.8V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.8V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.6V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.1V. Taping type TL
VFM STEP-UP DC/DC CONVERTER CONTROLLER 0.05 A SWITCHING CONTROLLER, 180 kHz SWITCHING FREQ-MAX, PDSO5
0.5 A SWITCHING CONTROLLER, PDSO5
VFM step-up DC/DC converter controller. Output voltage 3.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Antistatic bag for samples
|
RICOH[RICOH electronics devices division]
Ricoh Co., Ltd.
RICOH COMPANY LTD
|
| OP905 |
PIN Sili con Pho todiode
|
OPTEK[OPTEK Technologies]
|
